Slim, ultra low power sensor beacon with a typical battery life of 1.5 years using the default settings. Can send 2 iBeacon transmissions - push button sends a second iBeacon UUID, major and minor for..
Sensor beacon with accelerometer. Based on the power efficient nRF52 SoC. Advertises iBeacon, Eddystone and acceleration (x,y,z) advertising. Can be set up to advertise one iBeacon UUID when stil..
Beacon advertising temperature/humidity/light sensor data. Based on the power efficient nRF52 SoC, AP3216 light sensor and HTS221 humidity/temperature sensor.Good mounting options including magnet on ..
Ultra long range (200m+) beacon using the TI CC2590 range extender, that can advertise iBeacon or Eddystone-UID or Eddystone URL but not simultaneously. Barcoded for easy identification. Internal PCB ..
Small wristband beacon advertising iBeacon. One of our smallest beacons. PCB measures 23.9mm x 23.1mm.Black only.Supplied with details how to access the technical information.Does not include battery ..
Beacon that can be set up to advertise iBeacon, Eddystone-UID and Eddystone-URL.White only.Supplied with details how to access the technical information.Does not include battery - needs CR2450. ..
Rugged (10 ton impact), waterproof IP67 beacon that advertises iBeacon.Yellow only.Supplied with details how to access the technical information.Does not include battery - needs 2x AA batteries. ..
USB beacon with external antenna Beacon that can be set up to advertise iBeacon, Eddystone-UID and Eddystone-URL.One of the problems with USB beacons is that the form factor and proximity of the devic..
This gateway reads raw advertising data and sends it on to your chosen HTTP server, MQTT server or websocket server via WiFi. Supports throughput up to 50 beacons/sec.This gateway sends raw advertisin..
This gateway reads raw Bluetooth LE advertising data and sends it on to your chosen HTTP, WebSocket server or MQTT server via WiFi. Supports both WiFi and Ethernet connection. External WiFi ante..
The ABSniffer 528 scans for devices and sends the data via USB/TTL plugged into a PC, Mac, Linux or Raspberry Pi. It shows up on the Raspberry Pi as /dev/ttyACM0. It communicates with PC through a vir..
Wearable Arduino board with DA14580 BLE module. Includes on-board micro-USB connector for programming, 4 x 10-bit ADC pins, 9 x Digital I/Os (4 are PWM capable), Rx and Tx Hardware Serial Connections,..